product Introduction:

UV accelerated weathering aging chamber can reproduce the damage caused by sunlight, rain and dew. The equipment tests the material to be tested by exposing it to a controlled interactive cycle of sunlight and moisture, while increasing the temperature. UV aging chamber uses ultraviolet fluorescent lamp to simulate sunlight, and can also simulate the influence of moisture by condensation or spray. It is the necessary test equipment in the fields of aviation, automobile, household appliances, scientific research, etc.

Executive Standards ：

UV aging chamber is suitable for performance reliability test of various industrial products, refer to GB / T 14522-2008 《 Test methods for artificial weathering of plastics, coatings and rubber materials for mechanical products fluorescent ultraviolet lamp 》 、 GB / t16585-1996 vulcanized rubber artificial weathering (fluorescent ultraviolet lamp) test method and GB / t16422.3-1997 Test method for exposure to light sources in plastics Laboratory Section Part 3: fluorescent ultraviolet lamp Design and manufacture according to relevant standard terms; The UV aging test was carried out in accordance with the international standards of d5204, d0205, d0205 and other international standards, such as d0205, d0205, d0205, d0205, d0205, d0204, d0204, d0204, d0204, d0204, d0204, d0204, d0204, d0204, d0204, d0204, d0204, d0205, d0254, d0254, d0204, d025, d025, d025.

Technical reference Number:

1. Temperature range: RT + 10 ℃～ 70 ℃

2. Humidity range: ≥ 95% R.H

3. Temperature fluctuation: ≤± 0.5 ℃

4. Temperature uniformity: ≤± 2 ℃

5. Blackboard temperature: 40 ℃ ~ 65 ℃

6. Distance between lamps: 35mm

7. Distance between sample and lamp tube: 50mm

8. Lamp power: 40W

9. UV wavelength: 290nm ~ 400nm (when ordering)   

10. Condensation time: adjustable condensation time

11. UV exposure and simulated condensation time range: 0 ~ 99 H

12. Support template: 150 × 75 (mm)

13. Sample quantity: about 40 pieces

16. Test time: 0 ~ 9999 h, adjustable